CX HAMMER
The CX range of piling hammers are designed for driving a wide range of bearing or sheet piles. Available with legs and inserts or tube pile guides for use freely suspended, or with back guides for operating from a Hydraulic piling rig or leaders. The hammers are capable of driving Steel or Concrete piles to an ultimate load bearing capacity of up to 8000kN.
Features include total control of hammer stroke and blow rate, precise matching of energy to suit the pile driving requirements, simple and fast Drive Cap dolly changing.
Total control of hammer stroke and blow rate
Allows precise matching of energy to suit the pile driving requirements
Highly efficient hydraulic system gives low energy loss and low running cost
Simple, fast dolley changing
Cylinder and Drop-weight connection with shock absorber, easily accessible
Cage and Drop-weight design gives short overall hammer length
Available with BSP Hydropacks for optimum hammer performance
| Model | CX50 | CX60 | CX85 | CX110 |
|---|---|---|---|---|
| Dropweight Mass (kg) | 4000 | 5000 | 7000 | 9000 |
| Hammer Energy (kN.m) | 50 | 60 | 85 | 110 |
| Max Equivalent Stroke (m) | 1.20 | 1.20 | 1.20 | 1.20 |
| Operating Pressure (bar) | 200 | 240 | 250 | 260 |
| Hyd Oil Flow required (L/min) | 180 | 220 | 220 | 220 |
| Blow Rate at rated energy (bpm) | 46 | 40 | 38 | 35 |
| Basic Hammer Length (mm) | 5020 | 5860 | 5860 | 6380 |
| Basic Hammer Weight (kg) | 7800 | 9160 | 11450 | 14110 |
| Operating Mode | FS PR |
FS PR |
FS PR |
FS PR |
| Pile Type | SP TH CP WP |
SP TH CP WP |
SP TH CP |
SP TH CW CP |
| Maximum Pile Size (mm) | 1000 | 1220 | 1525 | 1525 |
| Power Source | PP PTO |
PP PTO |
PP PTO |
PP PTO |
| Max Pile Bearing Capacity (kN) | 3700 | 4600 | 6500 | 8400 |